How is Concrete Mixed

How to mix concrete in a mixer

Here’s a step-by-step guide on how to mix concrete in a mixer.

1. Gather your materials

You’ll need cement, sand, gravel, and water. Make sure you have enough of each material to create the desired amount of concrete. If your not sure of the mix ratio take a look below.

2. Set up the mixer

Choose a level, stable surface to set up your mixer. Make sure the mixer is clean and free of any debris. Set the mixer to the appropriate speed for the amount of concrete you’ll be mixing.

3. Add the materials

Start by adding the water to the mixer. Then add the cement, sand, and gravel in the desired proportions. For example, a common mixture for concrete is 1 part cement, 2 parts sand, and 3 parts gravel.

4. Mix the concrete

Turn on the mixer and let it run for several minutes until the concrete is thoroughly mixed. You may need to stop the mixer periodically to scrape down the sides and ensure all the materials are incorporated.

5. Check the consistency

Once the concrete is mixed, check its consistency. It should be thick and uniform, with no dry spots or excess water. If it’s too thick, add a little more water. If it’s too runny, add a little more cement or sand.

6. Pour and use the concrete

Once the concrete is mixed to the desired consistency, pour it into a wheelbarrow or other container and transport it to your construction site. Use the concrete as soon as possible to ensure it doesn’t begin to harden before it’s placed in its final position.